
496339 Issue 1 25 of 44
Menu 70: Program Communications
Menu 71: Communications options:
Dial Type = Loop Disconnect
Call Mode = Disabled
Menu 73: Downloader Options:
Account Name = (blank)
Rings to Answer = 5,
Secure Callback = Disabled,
P01 to P03 Download Numbers = (blank)
When the installer resets defaults using the RST pins, the system changes
the following items:
Installer Code 7890
User Code 1234
Working With <DOWNLOADER>
The system can be connected to a remote PC using the built in modem over
the telephone network. The remote PC can run <DOWNLOADER> to exam-
ine and modify the programming of the system. To prepare the system for
this function:
• Use Menu 73 to set up automatic answering to a remote PC.
• Use Menu 66 to manually control the system when the remote PC calls
for the first time. Note that Menu 66 can also be used at the system
site to control contact with a local PC (for example a laptop PC).
Downloader Options (Menu 73) lets you:
• View (not change) the control panel account name which is transmitted
from the remote PC on the first upload. This account name can be
alpha/numeric and is printed at the head of every local printout of the
log, system configuration or test options.
Note:
Once you have loaded Account Name using a remote PC link then do not
make any changes to the Account Name by using Menu 11 from the keypads.
The reason for this is that the when the PC connects to the system it first of all
checks that the current Account Name in the end station matches the Account
Name on the PC. If the two Account Names do not match then the PC immedi-
ately breaks the connection.
• Set the number of rings that the 8136 waits before answering an
incoming call from the remote PC.
• Enable or disable the Secure Call Back facility. This function provides
extra security when a remote PC is dialling into the 8136. When the
remote PC calls, the 8136 waits for the set number of rings and then
8136 Working with <Downloader>
Komentáře k této Příručce